Abstract
A high Cr Fe40Cr40Ni20 (at.%) medium-entropy alloy was prepared through vacuum arc melting. The alloy exhibited a dual-phase structure comprising face-centered-cubic (FCC) and body-centered-cubic (BCC) phases in a solid solution state. After annealing and cold rolling, two different heterogeneous structures emerged from the original FCC and BCC phases through mutual phase transformation. Moreover, the alloy exhibited a yield strength, ultimate tensile strength, and total elongation of 1.18 GPa, 1.25 GPa, and 13 %, respectively. The high strength of the alloy was mainly attributed to boundary strengthening and heterogeneous deformation-induced (HDI) strengthening within the two heterogeneous structures. Notably, the effectiveness of HDI strengthening was enhanced owing to the complete encapsulation and constraint of soft zones by hard zones in the heterogeneous structure originating from the BCC phase. Additionally, the deformation ability of the alloy mainly depended on dislocation slips and deformation twinning in recrystallized FCC grains and FCC strip phases, thereby ensuring satisfactory ductility.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
