Enhancing magnetocaloric properties of NiMnGa-based alloys via Dy micro-alloying and pseudoelastic cyclic training

Abstract

Considerable interest to improve magnetic entropy change (ΔSm) and broaden working temperature interval (WTI) of NiMnGa ferromagnetic shape memory alloys (FESMAs) was stimulated by their applications as promising candidate materials for solid-state refrigeration. In the present study, we presented an approach to enhance the magnetocaloric properties of polycrystalline NiMnGa FESMAs via combining Dy micro-alloying and pseudoelastic cyclic training. The introduction of Dy elements established stable magneto-structural coupling transformation from the paramagnetic austenite to ferromagnetic martensite, accompanied by a large ΔSm [−16.42 J/(kg K)] and a widened WTI (∼15.98 K). Fascinatingly, it was demonstrated that the internal strain fields at phase interface between matrix and DyNi4Ga precipitates could assist the phase transformation nucleation, which significantly reduced the hysteresis loss from 20.84 J/kg of Ni54Mn25Ga21 alloy to 8.14 J/kg of Ni54Mn25Ga20.7Dy0.3 alloy. More importantly, the subsequent pseudoelastic cyclic training produced a strong ⟨110⟩NM preferred crystallographic orientation, which facilitated the magnetic alignment along easy magnetization axis. Consequently, the giant ΔSm value up to −24.25 J/(kg K) and effective refrigeration capacity RCeff of 198.77 J/kg were further achieved in the trained Ni54Mn25Ga20.7Dy0.3 alloy under an external magnetic-field change of 5.0 T.