Abstract
This study advances the detection of bacteria at low concentrations in single-entity electrochemistry (SEE) systems by integrating forced convection. Our results show that forced convection significantly improves the mass transfer rate of electrolyte, with the mass transfer coefficient demonstrating a proportional relationship to the flow rate to the power of 1.37. Notably, while the collision frequency of E. coli initially increases with the flow rate, a subsequent decrease is observed at higher rates. This pattern is attributed to the mechanics of cell collision under forced convection. Specifically, while forced convection propels cells towards the ultra-microelectrode (UME), it does not aid in their penetration through the boundary layer, leading to cells being driven away from the UME at higher flow rates. This hypothesis is supported by the statistical analysis of collision data, including signal heights and rise times. By optimizing the flow rate to 2 mL/min, we achieved enhanced detection of E. coli in concentrations ranging from 0.9 × 107 to 5.0 × 107 cells/mL. This approach significantly increased collision frequency by elevating the mass transfer of cells, with the mass transfer coefficient rising from 0.1 × 10−5 m/s to 0.9 × 10−5 m/s. It provides a viable solution to the challenges of detecting bacteria at low concentrations in SEE systems.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.