Abstract
Enhancement of the cooling and heating capabilities of an air conditioning unit (ACU) coupled with a thermal energy storage system of dual phase change materials (PCM) is investigated. The dual PCM, namely SP24E and SP11_gel, are coupled with the ACU outdoor device (condenser/evaporator) during the summer/winter seasons, respectively. Moreover, ACU performance assisted with dual-PCM heat exchanger is compared with a single heat exchanger of SP24E in summer and single heat exchanger of SP11_gel in winter at different PCM capsulation structures (aligned and staggered cylinders). The system dynamic mathematical model is computationally solved using ANSYS software and experimentally validated. Results affirm that charging/discharging periods are minimal for the dual-PCM system and slower for PCM inline cylinder layouts than staggered ones. Inline design yields greater ACU average power savings. In summer, higher inlet air temperature to the PCM system reduces PCM discharging time and ACU power savings, with the opposite effect during winter. ACU COP with PCMs is improved by around 80 % in summer and 40 % in winter, respectively, compared to ACU without PCMs. The maximum average power saving over 4 h of ACU working in summer by single and dual-PCM systems is 21.4 % and 11.8 %, respectively, whereas the results in winter are 18.5 % and 12.8 %, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
