Abstract
The efficiencies of raw and modified kaolinite mineral in removing selected heavy metal ions from their respective aqueous solutions were investigated. The mineral was modified through two different methods; i) activation with HNO3, H2SO4, H3PO4, CH3COOH and C2H2O4 acids to form NK, SK, PK, AK and OK acid activated clays respectively and ii) preparations of 3:1 and 1:1 Kaolinite: Bentonite blends to form UBK and EBK composites respectively through manual blending. The adsorbents were characterized by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Fourier Transform Infra-Red Spectroscopy (FTIR) and Brunauer Emmett Teller (BET) analysis for surface area determination. The surface area increased in some of the modified clays from 114.9457 m2/g (RK) to 288.685 m2/g (EBK), 205.92 m2/g (UBK), 162.227 m2/g (NK), 151.335 m2/g (SK), and 115.837 m2/g (OK) but reduced to 113.872 m2/g (PK) and 112.865 m2/g (AK) after modification. Adsorption studies were subsequently conducted out to remove Pb2+, Cd2+ and Ni2+ ions from synthetic solutions. Pb2+ was found to be most removed (383.5 mg g-1 (RK), 591.13 mg g-1 (EBK), 576.61 mg g-1 (UBK), 475 mg g-1 (NK), 450 mg g-1 (SK), and 425 mg g-1 (PK), 375 mg g-1 (OK) and 375 mg g-1 (AK)) with highest removals on the composites.
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
