Abstract
Abstract The development of cost-effective and highly efficient biochar-based catalysts is essential for the catalytic steam reforming process of bio-oil. In this study, pickling peanut shell biochar was used to prepare biochar-supported Ni/Co monometallic catalyst and biochar-supported nickel-Co bimetallic catalyst through the impregnation method. The catalytic effect of these catalysts on acetic acid (a bio-oil model compound) steam reforming was investigated. It was found that Co could enhance the dispersion of metal particles. The catalyst exhibited the best catalytic effect and significantly improved resistance to carbon deposition with a loading of 8 wt% and a Ni-to-Co ratio of 6:2. At the temperature of 600 °C and the S/C ratio of 3, the selectivity of H2 reached 84.48 %, and the conversion of acetic acid reached 95.49 %. A synergistic effect was observed between Ni and Co, leading to increased metal dispersion, enhanced reducibility, and a higher number of active centers. Co facilitates water dissociation and promotes the oxidation of C–H and mobile O, resulting in a faster decarbonization rate. The effective utilization of biochar-based catalysts and the rational utilization of bio-oil contribute to the timely achievement of carbon emission reduction targets.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Chemical Reactor Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
