Abstract
The use of a micro heat sink is an effective means of solving the problem of high-power chip heat dissipation. Diamond/Cu composites exhibit high thermal conductivity and a linear thermal expansion coefficient that is compatible with semiconductor materials, rendering them ideal micro heat sink materials. The aim of this study was to fabricate diamond/Cu and Cu separately as heat sinks and subject them to flow boiling heat transfer experiments. The results indicate that the diamond/Cu heat sink displayed a decrease in wall superheat of 10.2–14.5 °C and an improvement in heat transfer coefficient of 38–51% compared with the Cu heat sink under identical heat fluxes. The heat sink also exhibits enhanced thermal uniformity. Secondary diamond particles are incorporated into the gaps of the main diamonds, thereby constructing a three-dimensional heat conduction network within the composite material. The diamond network enhances the internal heat flux of the material while also creating more nucleation sites on the surface. These increase the boiling intensity of the diamond/Cu heat sink, leading to better heat transfer performance. By combining the transient thermal model with computational fluid dynamics, a heat transfer model based on the diamond/Cu heat sink is proposed. The efficient heat dissipation capability of diamond/Cu heat sinks can lower the working temperature of microelectronic devices, thereby improving device performance and reliability during operation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.