Enhanced workability, durability, and thermal properties of cement-based composites with aerogel and paraffin coated recycled aggregates

Abstract

The use of construction and demolition (C&D) wastes in building materials is a key step toward a sustainable construction industry. In this context, the application of recycled concrete aggregates (RCAs) in cement composite mixtures has been investigated by various researchers. The results available in the literature indicate that cement mortar adhered to the surface of RCAs leads to high water absorption and large porosity in cementitious mixtures. As a result, lower workability, durability, and mechanical properties in comparison to conventional aggregates are often known as the main attributes of mixtures containing RCAs. Additionally, improving the thermal energy storage capability of RCAs by using high-performance thermal insulation materials, such as phase change materials (PCMs) and aerogel can assist in minimizing the energy consumption in buildings. Accordingly, this paper aims at characterizing RCA mixtures with enhanced workability, durability, and thermal properties. The effect of using paraffin coated recycled concrete aggregates (PCRAs) and aerogel aggregates on the mechanical, thermal, and durability properties of cement composites are investigated in this paper. Results of dry density, compressive strength, water absorption content, permeable voids, thermal conductivity, rapid chloride migration test (RCMT), capillary water absorption, and scanning electron microscopy (SEM) tests along with energy-dispersive X-ray spectroscopy (EDX) are reported to evaluate the effect of several variables on the investigated concrete mixtures. Results of the conducted tests indicate that using PCRA significantly improves the durability characteristics of mixtures such as water absorption content, permeable voids, and RCMT, while it slightly decreases the compressive strength of mixtures with respect to the control mixture. In addition, aerogel aggregates significantly improve the thermal conductivity of mixtures while reduced the mechanical and durability characteristics.