Abstract
Carbon nanotube sponges synthesized at the laboratory scale typically use a Fe-based organometallic catalyst, but low-cost alternatives with a higher yield ratio are needed for large-scale production. This work introduces a catalyst made from a mixture of silicon dioxide (SiO2) and hematite (Fe2O3) as an innovative alternative for the high-yield production of spongy-type multi-walled carbon nanotubes (ST-MWCNTs). We used a ball-milled mixture of SiO2 and Fe2O3 powders as the catalyst and toluene and N, N-dimethylformamide as carbon and nitrogen sources in an aerosol-assisted catalytic chemical vapor deposition system. Incorporating SiO2 into the Fe-based catalyst increased production yield to 184 % of the catalyst weight. The synthesized ST-MWCNTs exhibited a high crystallinity ratio (ID/IG = 0.34) with a unique entangled bundle-type nanotube configuration. At the same time, the presence of Si atoms and oxygen-type functionalities, demonstrated by X-ray photoelectron spectroscopy, modified their electrochemical behavior, making them suitable for supercapacitor or sensor applications. Additionally, the spongy structure demonstrated a reversible absorption capacity of over 15 times its weight with organic solvents like gasoline or ethylene glycol. This new catalyst configuration opens alternatives for generating higher amounts of 3D carbon nanomaterials with potential energy storage, water filtration, and environmental remediation applications.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call