Abstract
Surface treatments were performed on single-crystal semi-insulating 6H–SiC by femtosecond pulsed laser irradiation, aimed at analyzing the effect of the laser-induced periodic surface structures (LIPSSs) on the films’ optical properties. The surface morphology study of the laser-induced nanostructures allows determining the modification threshold fluence of about 0.7 J cm−2 as well as detecting fine (160 nm) and coarse (450–550 nm) ripples according to different values of the laser pulse fluence (ΦP) released to the material. Micro-Raman spectroscopy allows determining the presence of undesired amorphous structural phases when ΦP exceeds 2.15 J cm−2, whereas no compositional variations occur for lower values of ΦP. Samples treated on the entire surface with the pulse fluence conditions to obtain fine ripples were optically tested. Although the long-range order is progressively lost as the accumulated laser fluence increases, the heaviest treated samples show solar absorptance values > 75% and spectral selectivity up to 1.7 projected at the operating temperature of 1000 K, thus pointing out the suitability of fs-laser surface textured 6H–SiC to act as a selective solar absorber for energy conversion devices operating at high temperature.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.