Enhanced salt removal performance using nickel hexacyanoferrate/carbon nanotubes as flow cathode in asymmetric flow electrode capacitive deionization

Abstract

One of the most widely used CDI processes is flow electrode capacitive deionization (FCDI), which is preferred over conventional CDI with static electrode due to its continuous treatment of high-salt wastewater and ability to scale production. However, the discontinuous charge transport network in flow electrodes restricts the improvement of desalination performance. In this study, we prepared nickel hexacyanoferrate and carbon nanotubes composites (NiHCF@CNTs) by a simple ball-milling method and constructed an asymmetric FCDI (AFCDI) system using NiHCF@CNTs and AC as flow cathode and anode, respectively. Then the desalination performance of AFCDI was examined and compared with that of symmetric FCDI system using AC as both flow electrodes under different conditions. The stability was also investigated by a 20-cycle operation test. It was found that AFCDI system showed higher average salt removal rate and lower energy consumption compared with FCDI, owing to the enhancement of charge transport resulting from the couple of high specific capacitance of NiHCF and excellent electrical conductivity of CNTs. Moreover, AFCDI system has stable desalination performance in continuous operation. These results indicate that compositing Faradic materials and CNTs is an effective strategy for improving desalination performance of FCDI.