Enhanced piezoelectric energy harvesting performance using trailing-edge flap

Abstract

This paper proposes a novel piezoelectric energy harvester attached with a trailing-edge flap under various installation angles, for enhancing the aeroelastic vibration and improving the harvesting performance. The mathematical models of the fluid-structure-electric coupled fields are derived, the simulation models of the multi-physical coupled fields of the harvester system with various installation angle flaps are established, and the experimental prototypes of the harvester are fabricated. The influences of the flap installation angles on the flow field and output characteristics are investigated theoretically, numerically, and experimentally. The results demonstrate that the flap stiffness and damping coefficients exert less influence on vibration characteristics and harvesting performance. The flap at a certain installation angle alters the flow field, affects the flow pattern, restricts the vortex shedding, and offsets the aerodynamic force and moment. A decrease in the flap installation angles results in increasing the vibration response and output performance. The obtained numerical results are in good agreement with the experimental and theoretical values, which verifies the effectiveness of the simulation model. The maximum plunge amplitude is 0.029 m and the output voltage is 15.51 V at 17.74 m/s and an installation angle of 0o. The enhancement ratio of the output voltage at 0o is up to 148.6% over 45o, which achieves better harvesting performance. The designed harvester system powers indirectly the pedometer for 104 s at 13.58 m/s. This research offers an essential foundation for achieving better tradeoffs in energy harvesting and vibration suppressing by appropriately selecting the flap installation angle.