Abstract
Peltier refrigerators are an environmentally friendly cooling method, as they require no refrigerants and have no moving parts. However, effective cooling requires optimal-strong heat rejection from the hot side of the Peltier module. This research proposes and tests a self-capillary ultra-thin (0.1 mm) water-attracting coated PVC membrane (SCCP) as an innovative effective heat rejection mechanism. The SCCP cools the hot side of the Peltier module to temperatures even lower than ambient air, without external power. The cooling effect is achieved through the evaporation of a thin water film on the hot surface, driven by capillary action, which releases latent heat. This process can occur under natural or forced convection, both of which are investigated under various voltage and temperature conditions. The SCCP method was compared to traditional heatsinks and showed superior performance, with the hot side temperature being not only cooler than that in heatsink mode but also cooler than the ambient temperature in most cases. Additionally, the SCCP method demonstrated reduced sensitivity to ambient temperature changes, with only a 2–3° increase in the hot side temperature when the ambient temperature was raised by 10°. The findings suggest that SCCP is a promising technique, with further results discussed.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call