Abstract
ABSTRACT High-quality molybdenum coating has been successfully deposited on the pure aluminium substrate by high-velocity oxygen fuel spraying and subsequent laser remelting and laser cladding process. The microstructure, bonding strength, micro-hardness and wear resistance of the coating were systematically investigated. Results showed that the obtained coating exhibits a good metallurgical bonding interface as well as a dense microstructure with Al8Mo3, AlMo3 and Al5Mo phases, which results in the significant improvement of the mechanical properties of the coating. The bonding strength is increased from 11 ± 1 to 57 ± 4 MPa after laser treatment. Micro-hardness of the coating (480 ± 30 HV) is observed to be increased by about 70% in comparison with the as-sprayed coating (281 ± 8 HV). The wear resistance of the Mo coating was also increased about five to six times by the laser remelting and cladding process.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
