Abstract
In order to improve mechanical properties of 6082 aluminum alloy, the SiCp/Al 6082 composites were prepared by the addition of the micron-sized SiC particles combined with the squeeze casting. The effects of the SiCp content and squeeze casting on the microstructure and mechanical properties of the 6082 aluminum alloy were investigated by SEM, EDS, TEM, tensile testing and hardness testing analysis methods. Research results exhibited that the SiCp content and squeeze casting had a significant impact on the microstructure and mechanical properties of the 6082 aluminum alloy. The addition of the SiCp refined the grain size of the 6082 aluminum alloy while caused the increase of the porosity with increasing the SiCp content, especially in the permanent mold casting condition. Compared to the permanent mold casting, the squeeze casting obviously reduced pore defects, refined grain size and made the SiCp distribute evenly as well as bond tightly with the Al matrix. The tensile strength, yield strength, elongation, elastic modulus and hardness of the 6082 aluminum alloy obtained with the SiCp and squeeze casting were remarkably improved, and the optimal mechanical properties were obtained with a 2 wt.% SiCp, and they increased 10.73 %, 72.7 %, 193.9 %, 23.5 % and 25.2 %, respectively, compared to those of the 6082 aluminum alloy obtained without SiCp and squeeze casting. The fracture surface of the SiCp/Al 6082 composites obtained with the squeeze casting was dense and exhibited a ductile fracture mode.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call