Abstract
In the present work, the application of an assisted electrokinetic process for the removal of heavy metals from real contaminated sediments was investigated. The process made use of both chemical and physical methods, including addition of chelating and acid agents, as well as application of a hydraulic gradient. Lab-scale electrokinetic runs were applied on two different dredged sediments varying the applied voltage gradient and the treatment duration. The use of EDTA significantly improved the overall performance of the electrokinetic treatment for sediment V (more than 60% mobilized for each metal), while only aggressive acid conditioning with nitric acid was able to remove significant amounts of heavy metals (up to 40.5% for Pb) from sediment S due to the strong buffering capacity of this material. This clearly assesses that the specific characteristics of the materials under concern and the reactions occurring at the electrodes must be carefully evaluated when applying an electroremediation process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Environmental Science and Health, Part A
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.