Abstract
Sludge samples were found to contain significant amounts of heavy metals (Cr, Cu, Ni, Pb and Zn) and were subjected to acid treatment using either hydrochloric, sulfuric, nitric or phosphoric acid. The optimum combination, in terms of metal removal efficiency and environmental impacts was sought through a variety of tests by applying a ratio of 1:5 of sludge quantity (g) per volume of acid (ml). The concentrations of the different acids used, were in the range of 5%–20% and the contact times ranged between 15 and 60 minutes. The optimum combination was achieved when the sludge samples were in contact with H2SO4 20%v/v for 60 minutes. In order to estimate the metal leachability, the heavy metal content as well as the metal distribution in the residue were investigated and it was found that most of the heavy metal content was extracted while the remaining was removed from the initial mobile phases to the more stable ones.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Environmental Science and Health, Part A
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
