Abstract
Abstract This study presents a novel approach to electrochemical detection of orthophosphate in potable water using hydrothermally synthesized nickel foam electrodes, modified with cobalt oxide (CoOx), zinc oxide (ZnOx), and zinc-cobalt oxide (ZnCoOx) nanocomposites. The incorporation of zinc-cobalt oxide into the electrode significantly enhances its stability and detection capability. In-situ phosphate detection was performed using voltammetric techniques in a highly alkaline environment (pH 14) facilitated by sodium hydroxide (NaOH). Comprehensive electrode characterization, including cyclic voltammetry (0 to 0.6 V at a scan rate of 50 mV/s), electrochemical impedance spectroscopy (105 to 10-2 Hz), scanning electron microscopy, and energy-dispersive X-ray spectroscopy, confirmed the superior performance of the synthesized electrodes. Among the tested configurations, the zinc-cobalt oxide nanocomposite on nickel foam exhibited outstanding sensitivity, with a sensitivity of 0.4 μA/μM across a concentration range of 0 to 40 μM, and an elevated sensitivity of 4.26 μA/μM within the 50 to 100 μM range. The electrode achieved a remarkably low detection limit of 0.171 μM/L (0 to 40 μM detection range) and 0.324 μM/L (50 to 100 μM, detection range), underscoring its potential for highly accurate phosphate detection. These findings highlight the sensor's applicability for diverse practical uses in water quality monitoring.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call