Enhanced Dielectric and Electric Properties of ZnFe2O4‐Poly(Vinylidene Fluoride) Composites by Employing Surface Hydroxylated ZnFe2O4 Nanoparticles

Abstract

AbstractA facile solvent casting technique has been reported in the fabrication of surface hydroxylated ZnFe2O4 (h‐ZFO) nanoparticles (NPs) filled with poly(vinylidene fluoride) (PVDF) as a matrix. The h‐ZFO filler particles are synthesized from neat ZnFe2O4. The dielectric and electric performance of polymer‐based composites is much related to the interface binding between filler particles and polymer matrix. In this work, the surface alternation technique employed a new path is developed to improve the compatibility between ZFO particles and the PVDF matrix. These PVDF‐ZFO composites were studied by X‐ray diffractometer (XRD), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). The h‐ZFO‐PVDF and ZFO‐PVDF composites are carefully analyzed by dielectric and electric properties by a wide range of frequencies. However, the morphological analysis exhibits uniform dispersion of the h‐ZFO NPs in the PVDF matrix. The h‐ZFO‐PVDF composites have a dielectric constant of about 35 for 1.5 wt.% of filler contents. Moreover, the h‐ZFO‐PVDF composites have lower dielectric loss than PVDF‐ZFO composites. It is suggested that the strong interaction between h‐ZFO filler particles and the PVDF matrix is the main reason for the improvement of dielectric properties. The outcomes of these methods have great potential for making high dielectric constants and relatively suppressed loss PVDF‐ZFO composites for advanced practical applications.