Abstract

As the demand for ocean exploration increases, studies are being actively conducted on autonomous underwater vehicles (AUVs) that can efficiently perform various missions. To successfully perform long-term, wide-ranging missions, it is necessary to apply fault diagnosis technology to AUVs. In this study, a system that can monitor the health of in situ AUV thrusters using a convolutional neural network (CNN) was developed. As input data, an acoustic signal that comprehensively contains the mechanical and hydrodynamic information of the AUV thruster was adopted. The acoustic signal was pre-processed into two-dimensional data through continuous wavelet transform. The neural network was trained with three different pre-processing methods and the accuracy was compared. The decibel scale was more effective than the linear scale, and the normalized decibel scale was more effective than the decibel scale. Through tests on off-training conditions that deviate from the neural network learning condition, the developed system properly recognized the distribution characteristics of noise sources even when the operating speed and the thruster rotation speed changed, and correctly diagnosed the state of the thruster. These results showed that the acoustic signal-based CNN can be effectively used for monitoring the health of the AUV’s thrusters.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call