Abstract
Aiming to develop a high-efficiency and low-cost high-temperature heat pump with large temperature lift ability, a novel vapor injection autocascade heat pump for high-temperature water heating is proposed in this paper. The proposed system utilizes the vapor injection technique to improve the limited performance of the conventional autocascade system and can achieve outstanding heating performance with over 100 °C heating temperature. The energy, exergy, economic and environmental performance of the proposed system are investigated by simulation method and compared with those of the conventional autocascade heat pump. The proposed system averagely improves the heating coefficient of performance and capacity by 51.8% and 104.3% over the conventional system when the evaporating temperature ranges from 0 °C to 20 °C, respectively. The exergy analysis indicates that the excellent exergy performance of the proposed system mainly benefits from the irreversible loss reductions in the throttling valves and cascade condensers. The proposed system possesses the lowest energy cost except for the coal-fired boiler, and produces the minimum pollutant emission except for the gas-fired boiler. The heating coefficient of performance of the proposed system is improved by 12.4% ∼ 14.0% through single-objective optimization. The optimal coefficient of performance and levelized cost of energy are 2.59 and 0.070 $ kWh−1, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.