Energy efficient indoor localisation for narrowband internet of things

Abstract

AbstractThere are an increasing number of Narrow Band IoT devices being manufactured as the technology behind them develops quickly. The high co‐channel interference and signal attenuation seen in edge Narrow Band IoT devices make it challenging to guarantee the service quality of these devices. To maximise the data rate fairness of Narrow Band IoT devices, a multi‐dimensional indoor localisation model is devised, consisting of transmission power, data scheduling, and time slot scheduling, based on a network model that employs non‐orthogonal multiple access via a relay. Based on this network model, the optimisation goal of Narrow Band IoT device data rate ratio fairness is first established by the authors, while taking into account the Narrow Band IoT network: The multi‐dimensional indoor localisation optimisation model of equipment tends to minimize data rate, energy constraints and EH relay energy and data buffer constraints, data scheduling and time slot scheduling. As a result, each Narrow Band IoT device's data rate needs are met while the network's overall performance is optimised. We investigate the model's potential for convex optimisation and offer an algorithm for optimising the distribution of multiple resources using the KKT criterion. The current work primarily considers the NOMA Narrow Band IoT network under a single EH relay. However, the growth of Narrow Band IoT devices also leads to a rise in co‐channel interference, which impacts NOMA's performance enhancement. Through simulation, the proposed approach is successfully shown. These improvements have boosted the network's energy efficiency by 44.1%, data rate proportional fairness by 11.9%, and spectrum efficiency by 55.4%.