Energetic Comparison of Flow-Electrode Capacitive Deionization and Membrane Technology: Assessment on Applicability in Desalination Fields.

Abstract

Flow-electrode capacitive deionization (FCDI) is a promising technology for sustainable water treatment. However, studies on the process have thus far been limited to lab-scale conditions and select fields of application. Such limitation is induced by several shortcomings, one of which is the absence of a comprehensive process model that accurately predicts the operational performance and the energy consumption of FCDI. In this study, a simulation model is newly proposed with initial validation based on experimental data and is then utilized to elucidate the performance and the specific energy consumption (SEC) of FCDI under multiple source water conditions ranging from near-groundwater to high salinity brine. Further, simulated pilot-scale FCDI system was compared with actual brackish water reverse osmosis (BWRO) and seawater reverse osmosis (SWRO) plant data with regard to SEC to determine the feasibility of FCDI as an alternative to the conventional membrane processes. Analysis showed that FCDI is competent for operation against brackish water solutions under all possible operational conditions with respect to the BWRO. Moreover, its distinction can be extended to the SWRO for seawater conditions through optimization of its total effective membrane area via scale-up. Accordingly, future directions for the advancement of FCDI was suggested to ultimately prompt the commercialization of the FCDI process.