Empirical modelling and optimization of pressure-coupled infusion gyration parameters for the nanofibre fabrication.

Abstract

Pressure-coupled infusion gyration (PCIG) is a novel promising technique for economical and effective mass production of nanofibres with desirable geometrical characteristics. The average diameter of spun fibres significantly influences the structural, mechanical and physical properties of the produced fibre mats. Having a comprehensive understanding of the significant effects of PCIG experimental variables on the spun fibres is beneficial. In this work, response surface methodology was used to explore the interaction effects and the optimal PCIG experimental variables for achieving the desired morphological characteristics of fibres. The effect of experimental variables, namely solution concentration, infusion (flow) rate, applied pressure and rotational speed, was studied on the average fibre diameter and standard deviations. A numerical model for the interactional influences of experimental variables was developed and optimized with a nonlinear interior point method that can be used as a framework for selecting the optimal conditions to obtain poly-ethylene oxide fibres with desired morphology (targeted average diameter and narrow standard deviation). The adequacy of the models was verified by a set of validation experiments. The results proved that the predicted optimal conditions were able to achieve the average diameter that matched the pre-set desired value with less than 10% of difference.