Abstract
In order to model the effects of processing parameters (primary gas flow rate, stand-off distance, powder flow rate, and arc current) on the plasma spraying coating properties (thickness, porosity and micro-hardness), adaptive neural fuzzy inference system (ANFIS) and neural network (NN) based empirical models were proposed to estimate process parameters and understand the spraying process. To overcome the difficulty of the small size of sample data, and to balance the trade-off between model complexity and prediction accuracy, the bootstrap method was applied for the resampling technique, and cross validation was applied for the performance evaluation. The ANFIS and NN models were compared on the performance metrics of (1) mean square error (MSE), and (2) determination coefficient (R2). With the limited size of experiment data, both models illustrated high accuracy. In the training stage: on the R2, ANFIS has the value of 1, and NN has the minimum value of 0.84; on the MSE, ANFIS has the minimum value of 1.3e−5, and NN has the minimum value of 0.32. In the validation stage: on the R2, ANFIS has the minimum mean value of 0.42, and NN has the minimum mean value of 0.512; on the MSE, ANFIS has the minimum mean value of 23.67, and NN has the minimum mean value of 89.50. The comparisons illustrated that ANFIS model showed significant superiority over the NN model. This may be due to the fact that ANFIS combines the strength of NN's learning capability and fuzzy logic's knowledge interpretation ability. With the obtained ANFIS model, the physical mechanisms – including (1) melting states of particles, (2) loading effect, and (3) oxidation – were interpreted as processing parameters’ effects on the coating properties. The empirical models and that physical mechanism are viable to be effectively integrated with feedback control strategy to regulate the coating quality in plasma spraying process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.