Emission Concentration and Characteristics of Particulate Matter and Water-Soluble Ions in Exhaust Gas of Typical Combustion Sources with Ultra-Low Emission

Abstract

A self-developed direct condensation sampling system and monitoring method for total particulate matter (TPM) in ultra-low-emission and high-humidity exhaust gas were applied to the emission monitoring of particulate matter in flue gas from three typical combustion sources with ultra-low emissions in Beijing. The emission levels and composition characteristics of particulate matter and water-soluble ions in the exhaust gas of typical combustion sources with ultra-low emissions were analyzed and evaluated. The interaction and influencing factors of filterable particulate matter (FPM) and condensable particulate matter (CPM) and their water-soluble ions were explored. The results showed that the emission concentration of FPM in the exhaust gas of the coal-fired boiler with ultra-low emissions was between 1.04 mg·m-3 and 1.11 mg·m-3 in standard smoke oxygen content, and that of TPM was between 3.82 mg·m-3 and 8.69 mg·m-3, which all met the national ultra-low emission limit (10 mg·m-3). However, the TPM emission concentration of the coal-fired power plant exceeded the emission limit of Beijing (5 mg·m-3). The emission concentrations of CPM and its total water-soluble ions from the coal-fired heating boiler were 3.05 mg·m-3 and 1.30 mg·m-3, respectively, which were significantly lower than those of the coal-fired power plant, and were related to the higher load and flue gas temperature of the coal-fired power plant. Furthermore, the emission concentrations of CPM and its total water-soluble ions from the coal-fired power plant boiler were 2.2 to 2.4 times and 1.7 to 2.2 times greater than those of the coal-fired heating boiler, respectively. The emission concentrations of TPM and its total water-soluble ions from the gas power plant were 1.99 mg·m-3 and 1.44 mg·m-3, respectively, which were significantly lower than those from the coal-fired boiler. CPM was the main form of particulate matter in the exhaust gas of the combustion source. The contribution of CPM to TPM in the ultra-low-emission boiler flue gas increased significantly, and increased with the increase in the flue gas temperature, ranging from 72.6% to 88.1% for the coal-fired boiler and 93.1% for the gas power plant. Total water-soluble ions made up 66.1% to 94.2% of the CPM. The flue gas temperature had a significant impact on the existing forms, removal efficiencies, and emission concentrations of particulate matter and water-soluble ions. SO42- was the main characteristic water-soluble ion of particulate matter in the coal-fired boiler, and its emission concentration ranged from 0.98 mg·m-3 to 1.18 mg·m-3, accounting for 27.7% to 49.6% of the total water-soluble ion emissions, which originated from flue gas desulfurization. F- was another characteristic water-soluble ion of particulate matter in the coal-fired power plant, and its emission concentration ranged from 1.91 mg·m-3 to 2.32 mg·m-3, accounting for 54.4% to 56.1% of the total water-soluble ion emissions, which might have been related to the high F content of fuel coal. NH4+ was the main characteristic water-soluble ion of particulate matter in the gas power plant, and its emission concentration was 0.92 mg·m-3, accounting for 64.2% of the total water-soluble ion emissions, which originated from the escape of NH3 in the process of selective catalytic reduction. The emission concentration of NH4+ was significantly higher than that of the coal-fired boiler; this might have been related to the synergistic removal effect of the gas-fired power plant, which lacked other purification facilities.