Abstract
GaAs/Al0.30Ga0.70As quantum wells (QWs) with InAs quantum dot (QD) arrays covered by the different capping layers: Al0.30Ga0.70As or Al0.1Ga0.75In0.15As, have been investigated by means of the photoluminescence (PL) and high resolution X-ray diffraction (HR-XRD) methods. It is revealed that the QD emission in the structure with Al0.1Ga0.75In0.15As capping is characterized by the lower PL energy, higher PL intensity of ground state emission and smaller its full width at half maximum (FWHM) in comparison with ground state QD emission at Al0.30Ga0.70As capping. The analysis of PL and HR-XRD scans has shown that the strain relaxation at high QW growth temperatures in the structure with Al0.30Ga0.70As capping was connected with changing significantly the material compositions of the QDs and capping layer. As a result the QD emission shifts into the higher energy range, the PL intensity decreases and the FWHMs of PL bands increase. In contrary, in the structure with Al0.1Ga0.75In0.15As capping the strain relaxation manifests itself by decreasing the InAs QD heights without changing the InAs QD material composition. The advantage of Al0.1Ga0.75In0.15As capping has been discussed.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
