Elongational viscosity for miscible and immiscible polymer blends. II. Blends with a small amount of UHMW polymer

Abstract

The effect of miscibility on elongational viscosity of polymer blends was investigated in homogeneous, miscible, and immiscible states by the blend of 1.5 wt % of ultrahigh-molecular-weight (UHMW) polymer. The matrix polymer was either poly(methyl methacrylate) (PMMA), or poly(acrylonitrile-co-styrene) (AS) that has a comparable elongational viscosity value. The homogeneous blend consisted of 98.5 wt % of PMMA and 1.5 wt % of UHMW–PMMA. The miscible blend was composed of AS and UHMW–PMMA at the same ratio. The immiscible blend was a combination of AS and UHMW–polystyrene (PS) at the same ratio. The strain-hardening behavior of the different blends were compared with that of pure PMMA. It was demonstrated that 1.5 wt % of UHMW induces a strong strain-hardening property in the homogeneous and miscible blends but was hardly changed in the immiscible blend. The optical microscope observation of the immiscible blend suggested that the UHMW domains were stretched, but that the degree of domain deformation was less than a given elongational strain. It was concluded that the strain-hardening property is strongly affected by the miscibility of UHMW chain and matrix. The strong strain-hardening property is caused by the deformation of the UHMW polymer. UHMW chains are stretched when they are entangled with surrounding polymers. However, UHMW chains in an immiscible state are not so deformed because of viscosity difference and no entanglements between domain and matrix. A smaller degree of UHMW chain deformation in immiscible state results in weaker strain-hardening property. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 961–969, 1999