Abstract
Thin‐film perovskite light‐emitting diodes have gained increasing attention in the last 6 years. With the possibility to process the emitting layer from solution, the way for 1D morphology of the semiconductor for flexible devices is paved. Herein, for the first time single‐step fabrication of CsPbBr3@PVP nanofibers in a customized electrospinning process performed under ambient conditions from a water‐based precursor solution is reported. The water‐based approach allows the incorporation of a conductive polymer into the compound fiber by blending the perovskite precursor ink with commercially available PEDOT:PSS dispersion. The results demonstrate electrospun fiber mats which are stable at ambient conditions for at least 5 months and can be utilized in electroluminescence devices. Photoluminescence studies on the perovskite fibers reveal a blueshift of the emission peak compared to thin films possibly due to the generation of nanocrystals of ≈12 nm by in situ nanocrystal pinning as confirmed by transmission electron microscopy. A proof‐of‐concept electrically pumped light‐emitting device is built with the obtained fiber mat. The perovskite nanofibers offer promising applications in flexible and stretchable optoelectronics.
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call