Abstract
Direct alcohol fuel cells (DAFCs), which mostly use low-molecular weight alcohols such as methanol and ethanol as fuels, have attracted considerable interest in recent years because liquid fuels are suitable for portable applications compared to hydrogen gas, that is, they can be easy handled, stored, and transported. Methanol is recognized as a promising fuel for DAFCs, and the anode reaction in direct methanol fuel cells (DMFCs) or the electrooxidation of methanol has been extensively studied in order to improve performance of DMFCs and to achieve cost reduction. However, methanol is toxic for human which is one of the disadvantages of using methanol as fuel, and most methanol is produced from natural gas. On the other hand, ethanol is non-toxic, and it can be sustainably produced on a large scale from biomass. Thus, in these regards, direct ethanol fuel cells (DEFCs) have a strong advantage over DMFCs. Among the anode reaction in DAFCs, the electrooxidation of methanol on platinum has been studied the most because Pt is an excellent electrocatalyst for the oxidation. The oxidation occurs at the anode in the presence of water: CH3OH + H2O → CO2 + 6H+ + 6e-. (1) It is well accepted that the oxidation proceeds via a dual path mechanism consisting of indirect and direct paths. The indirect path involves adsorbed carbon monoxide (COad) as a poisoning intermediate, and the direct path involves a non-CO intermediate as a reactive one. Water produces oxygenated spices such as hydroxide and oxide, and it plays an important role in removal of COad. Thus, it seems that the oxidation does not proceed without water. However, as we have reported previously [1, 2], the methanol oxidation produces current without water, and the current is of the same order of magnitude as that observed in the presence of water, e.g., 0.1 and 1 M methanol aqueous solutions. A detailed study using surface-enhanced infrared absorption spectroscopy (SEIRAS) and high-performance liquid chromatography (HPLC) has revealed that COad reacts with methanol to form methyl formate (HCOOCH3): COad + CH3OH → HCOOCH3, (2) and also that the main current producing reaction without water is the formation of methyl formate (HCOOCH3) via non-CO pathway: 2CH3OH → HCOOCH3 + 4H+ + 4e-. (3) Pt is also known to be active for the electrooxidation of ethanol in aqueous solution. Complete oxidation of ethanol to CO2 is expressed as follows: C2H5OH + 3H2O → 2CO2 + 12H+ + 12e-. (4) The cleavage of the C–C bond, which is involved in the complete oxidation, requires a high activation energy, and thus most ethanol is incompletely oxidized to acetic acid or acetaldehyde in acid media: C2H5OH + H2O →CH3COOH + 4H+ + 4e-, (5) C2H5OH → CH3CHO + 2H+ + 2e-. (6) We have recently found that ethanol is also oxidized at Pt electrode in the absent of water (CVs shown in Figure 1). From the analogy of the reaction between COad and methanol (reaction 2), it can be deduced that COad reacts with ethanol to form ethyl formate (HCOOC2H5): COad + C2H5OH → HCOOC2H5. (7) However, COad is found to be hardly removed in the absent of water (SEIRA spectra shown in Figure 1). In spite of this, the current increases monotonically as the electrode potential (E) increases in the potential region above ca. 0.4 V vs. SHE, indicating that the electrode surface is not completely covered with COad. It is thus possible that the formation of acetaldehyde (reaction 6) proceeds at vacant sites at E > 0.4 V, which is in a good agreement with literature data [3]. In the presentation, we will discuss how ethanol is oxidized without water. REFERENCES [1] H. Okamoto, T. Gojuki, N. Okano, T. Kuge, M. Morita, A. Maruyama, Y. Mukouyama, Electrochim . Acta, 136 (2014) 385. [2] Y. Mukouyama, S. Yamaguchi, K. Iida, T. Kuge, M. Kikuchi, S. Nakanishi, ECS Trans., 80 (2017) 1471. [3] O. Guillén-Villafuerte, G. García, M. C. Arévalo, J. L. Rodríguez, E. Pastor, Electrochem . Comm ., 63 (2016) 48. FIGURE CAPTION Figure 1 Cyclic voltammograms for the oxidation of ethanol at a sweep rate of 0.1 V/s and simultaneously-measured SEIRA spectra. The concentration of ethanol is 1 and 17 M. The reference spectrum was taken with 0.5 M H2SO4 in the absence of ethanol at 0.05 V. Figure 1
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have