Abstract

Background: Many methods have been suggested for the removal of heavy metals from water to protect human health and the environment. Methods like precipitation and adsorption were proposed for this purpose. Objective: Electrocoagulation involves the generation of coagulant by the action of electricity on two metal electrodes (iron or aluminium) to aid the process of water decontamination. Methods: Electrodeposition cell was made with iron electrodes and application of voltage from the power supply (5-25 V) dipped in the working solution (Cu and Zn) at various concentrations (10-50 mg.mL-1) for 30-150 min. Samples were drawn and analysed by atomic absorption spectrophotometry. Results: The work indicated efficient removal of the metal ions. The dependence of removal efficiency on the three parameters was studied. The behaviour of the two metal ions was not identical. At low initial concentration, the electrolysis voltage was very important in the removal of Zn and Cu ions. Electrolysis time is essential in the removal process and shows a polynomial dependence of removal efficiency on time. Electrolysis time of 150 min resulted in almost complete removal (94-97%) regardless of the initial concentration. Both co-precipitation and adsorption mechanisms may be involved. Conclusion: The removal efficiency was directly dependent on the initial metal ion concentration and electrolysis time. The process gave removal efficiency for copper that is higher than that of the zinc.

Highlights

  • The occurrence of heavy metals (HM), in the environment, represents a real challenge

  • The removal efficiency was directly dependent on the initial metal ion concentration and electrolysis time

  • The effect of electrolysis time on the removal of Cu and Zn from water by electrocoagulation using various voltages was studied, and the residual concentration of the metal ion was measured to estimate the efficiency of removal

Read more

Summary

Introduction

The occurrence of heavy metals (HM), in the environment, represents a real challenge. They must be removed efficiently from surface water to reduce their adverse effects on aquatic life. Any action towards preventing the danger caused by heavy metals to human health and the environment, must involve their removal. This is because they cannot be transfor-. A variety of single and composite materials have been studied and approved as potential adsorbents for the removal of heavy metals from water. Many methods have been suggested for the removal of heavy metals from water to protect human health and the environment. Methods like precipitation and adsorption were proposed for this purpose

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call