Abstract
An electroactive polyaniline (PAn) was successfully prepared from nonaqueous propylene carbonate (PC) solution containing acid and electrolyte . PAn deposition and the doping‐undoping process of deposited PAn film were investigated by consecutive cyclic voltammetry in various electropolymerization solutions. It is confirmed by infrared spectral measurement that there is no essential difference in the manner of bonding between the electroactive PAn films deposited from aqueous and PC solutions. Inspection by scanning electron microscope revealed that PAn films deposited from aqueous solution had a fibrous structure, whereas the PAn film deposited from PC solution had a porous surface which resembled polypyrrole films. The shape of the electro‐oxidation curve is found to be essentially different, depending on the solvent or the value of acid in an electropolymerization solution. An electroactive PAn film deposited from PC solution was applied to an effective cathode material of a rechargeable lithium battery . The (deposited from PC solution) battery showed a high coulombic efficiency and high‐energy density in charging‐discharging behavior. The electroactivity of PAn film deposited from PC solution was found to be as high as, or higher than, that of PAn film deposited from aqueous solution.
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call