Abstract
The objectives of this study are to investigate characteristics of electrochemical oxidation of wastewater depending on electrode materials and to analyze the influence of the chloride ion as an electrolyte on electrochemical oxidation of pigment wastewater using a Ti/IrO 2 tube-type electrode. The Ti/IrO 2 electrode was adopted as the most proper material in the comparative analysis under COD removal efficiency and current efficiency. The current efficiency for each electrode material was decreased in the order of Ti/IrO 2 16.5%, Ti/Pt 14.0%, and graphite 3.4%. Two kinds of electrolytes of NaCl and Na 2 SO 4 revealed different levels of electrochemical oxidation under the same conductivity conditions. Specific energy consumption was reduced by adding a chloride ion in the electrochemical oxidation treatment. The chlorite ion (ClO 2 - ) and free chlorine were produced in the Ti/IrO 2 tube-type electrochemical oxidation systems. The production amount of chlorite ion was larger than double that of free chlorine production. The indirect oxidation process by the intermediate product was concluded to be the major principle for COD removal.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.