Abstract
Stainless steels such as STS 304, 316 and 630 are frequently used as shaft materials in small fiber reinforced polymer (FRP) fishing boats. If the shaft material is exposed to a severely corrosive environment such as seawater, it should be protected using appropriate methods. The impressed current cathodic protection was used to inhibit corrosion in shaft materials. In anodic polarization, passivity was remarkably more evident in STS 316 stainless steel than in STS 304 and STS 630. The pitting potentials of STS 304, 316, and 630 stainless steels were 0.30, 0.323, and 0.260 V, respectively. The concentration polarization due to oxygen reduction and activation polarization due to hydrogen generation were evident in the cathodic polarization trends of all three stainless steeds. STS 316 had the lowest current densities in all potential ranges, and STS 630 had the highest. Tafel analysis showed that STS 316 was the most noble in the three. In addition, the corrosion current density was the lowest for STS 316.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Transactions of Nonferrous Metals Society of China
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
