Abstract
Abstract The redox response of chlorogenic acid solution at an inactivated glassy carbon electrode was investigated and an ECE mechanism was proposed for the electrode process. It has been shown that the oxidation of chlorogenic acid at an activated glassy carbon electrode leads to the formation of a deposited layer of about 4.5×10 −10 mol cm −2 at the surface of the electrode. Cyclic voltammetry was used for the deposition process and the resulting modified electrode retains the activity of the quinone/hydroquinone group anticipated for a surface-immobilized redox couple. The properties of the electrodeposited films, during preparation under different conditions, and the stability of the deposited film were also examined. The pH dependence of the redox activity of these films was found to be 57 mV per pH unit, which is very close to the anticipated Nernstian dependence of 59 mV per pH unit. The modified electrode exhibits potent and persistent electrocatalysis for NADH oxidation in phosphate buffer solution (pH 7.0) with a diminution of the overpotential of about 430 mV and an increase in peak current. The electrocatalytic current increases linearly with NADH concentration from 0.1 to 1.0 mM. The apparent electron transfer rate constant, k s , and the heterogeneous rate constant for electrooxidation of NADH, k h , were also determined using cyclic voltammetry and rotating disk electrode voltammetry, respectively.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call