Abstract

The intelligent balloon water gate (IBWG) invention is a hydraulic gate model made of reinforced plastic that controls the water level (WL) downstream or upstream of a barrage. The IBWG automatically inflates and deflates by compressed air to close and open the water passage, respectively. The whole design consists of a balloon, a waterway, sensors, an air compressor, a control panel, an electrical circuit and a photovoltaic generation (PVG) system. The Tyass barrage in Iraq was considered as a case study. The Tyass barrage was built with concrete and four sliding steel water gates and redesigned using the IBWG. The originality of the current research resides in the combination of the IBWG mechanism with an efficient maximum power point (MPP) seeking controller for a photovoltaic generation system, which is one of the most promising sources of renewable energy in the world. To the best of our knowledge, in this field, this scenario has not yet been discussed in detail. Upper and lower water sensors are used to control the IBWG. The upper sensor sends a signal to the control panel when the downstream water level reaches its maximum value to open the air inlet valve and close the outlet valve, inflating 14 IBWGs with a volume of 3.5 m3 under 122 psi of pressure and closing the water passage. When the WL decreases below the minimum level, the lower sensor initiates the opposite procedure. The air compressor automatically fills the air tank to 181 psi and is supplied by a 24 VDC AGM rechargeable battery with a capacity of 40–60 Ah, which is charged by four solar panels connected in parallel and exposed to an average of 8.8 hrs/day of sunshine. The proposed MPP-seeking controller was implemented by a backstepping design coupled with the grey wolf mechanism. The solar irradiance data were observed 39 years ago. The proposed controller is capable of following the MPP with minimum oscillations under an external irradiance variation. The IBWG system is verified at night or during the early morning when the sun is not active. Nevertheless, it is possible to store compressed air in an auxiliary tank to avoid emergencies such as partial shading conditions.

Highlights

  • Traditional water gates play a significant role in the design of water dams and barrages, new developments either in the operation technology or in the power supply are stillThe associate editor coordinating the review of this manuscript and approving it for publication was Muhammad Imran Tariq .needed

  • The main goal of this research is to present a new technique for an intelligent balloon water gate that takes into consideration the development of tracking solar energy systems

  • Electro-hydrodynamic design of an intelligent balloon water gate is an encouraging application provided by a solar energy system especially that installed in rarely locations far away from the availability of national electricity and capability study to solve the problem of water scarcity

Read more

Summary

Introduction

Traditional water gates play a significant role in the design of water dams and barrages, new developments either in the operation technology or in the power supply are stillThe associate editor coordinating the review of this manuscript and approving it for publication was Muhammad Imran Tariq .needed. Traditional water gates play a significant role in the design of water dams and barrages, new developments either in the operation technology or in the power supply are still. The associate editor coordinating the review of this manuscript and approving it for publication was Muhammad Imran Tariq. In the past, sliding and radial steel gates were used in the design of dams but had many drawbacks such as difficulty fitting with the rubber seals and the requirement of continuous maintenance, which were accompanied by extreme problems when the hydraulic structure operated and damage caused by corrosion and oxidation. The electricity and manpower sources are problematic in traditional water gates. L. Al Maimuri et al.: Electro-Hydrodynamic Design of an IBWG

Objectives
Methods
Results
Conclusion
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call