Electro-Fenton and Induced Electro-Fenton as Versatile Wastewater Treatment Processes for Decontamination and Nutrient Removal without Byproduct Formation.

Abstract

It is a long-pursued goal to develop electrified water treatment technology that can remove contaminants without byproduct formation. This study unveiled the overlooked multifunctionality of electro-Fenton (EF) and induced EF (I-EF) processes to remove organics, pathogens, and phosphate in one step without halogenated byproduct formation. The EF and I-EF processes used a sacrificial anode or an induced electrode to generate Fe2+ to activate H2O2 produced from a gas diffusion cathode fed by naturally diffused air. We used experimental and kinetic modeling approaches to illustrate that the •OH generation and radical speciation during EF were not impacted by chloride. More importantly, reactive chlorine species were quenched by H2O2, which eliminated the formation of halogenated byproducts. When applied in treating septic wastewater, the EF process removed >80% COD, >50% carbamazepine (as representative trace organics), and >99% phosphate at a low energy consumption of 0.37 Wh/L. The EF process also demonstrated broad-spectrum disinfection activities in removing and inactivating Escherichia coli, Enterococcus durans, and model viruses MS2 and Phi6. In contrast to electrochemical oxidation (EO) that yielded mg/L level byproducts to achieve the same degree of treatment, EF did not generate byproducts (chlorate, perchlorate, trihalomethanes, and haloacetic acids). The I-EF carried over all the advantages of EF and exhibited even faster kinetics in disinfection and carbamazepine removal with 50-80% less sludge production. Last, using septic wastewater treatment as a technical niche, we demonstrated that iron sludge formation is predictable and manageable, clearing roadblocks toward on-site water treatment applications.