Electric-Field-Induced Alignment of Functionalized Carbon Nanotubes Inside Thermally Conductive Liquid Crystalline Polyimide Composite Films.

Abstract

The positive liquid crystals, 4'-heptyl-4-biphenylcarbonitrile (7CB), are used to functionalize carbon nanotubes (LC-CNT), which can be aligned in the liquid crystalline polyimide (LC-PI) matrix under an alternating electric field to fabricate the thermally conductive LC-CNT/LC-PI composite films. The efficient establishment of thermal conduction pathways in thermally conductive LC-CNT/LC-PI composite films with a low amount of LC-CNT is achieved through the oriented alignment of LC-CNT within the LC-PI matrix. When the mass fraction of LC-CNT is 15 wt %, the in-plane thermal conductivity coefficient (λ∥ ) and the through-plane thermal conductivity coefficient (λ⊥ ) of the LC-CNT/LC-PI composite films reach 4.02 W/(m ⋅ K) and 0.55 W/(m⋅K), which are 90.5 % and 71.9 % higher than those of the intrinsically thermally conductive LC-PI films respectively, also 28.8 % and 5.8 % higher than those of the CNT/LC-PI composite films respectively. Meanwhile, the thermally conductive LC-CNT/LC-PI composite films also possess excellent mechanical and heat resistance properties. The Young's modulus and the heat resistance index are 2.3 GPa and 297.7 °C, respectively, which are higher than the intrinsically thermally conductive LC-PI films and the thermally conductive CNT/LC-PI composite films under the same amount of CNT.