Abstract

Although wide band gap devices (WBG, e.g. GaN and SiC) are eminently suitable for high temperatures and harsh environments, these properties cannot be fully taken advantage of without an appropriate interconnect metallization. In this context, silver shows promise for interconnections at high temperatures. In this work, the thermal stability of Ag with two barrier metals – Ta and TaN – was therefore investigated. Metal stacks, consisting of 100nm of silver on 45nm of either Ta or TaN were sputter-deposited on the substrate. Each metal system was annealed in vacuum for one hour at temperatures up to 800°C. Both systems showed stable performance up to 600°C. The system with Ta as a barrier metal was found to be more stable than the TaN system. Above 700°C, silver agglomeration led to degradation of electrical performance.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.