Abstract
This study demonstrates the feasibility of all-solution-processed mean to fabricate carbon-based non-volatile memory (NVM). The NVM devices were fabricated on polyethylene terephthalate (PET) substrate using spin-coating and spray-coating techniques in the structure of silver nanowires (AgNWs)/graphene oxide (GO)/graphene quantum dots (GQDs)/graphene oxide (GO)/poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS)/PET. PEDOT:PSS was used as the bottom conductive layer and deposited by spin-coating method. GQDs were used as a charge trapping site in the structure and embedded in the two GO insulator layers. The AgNW metal electrode was formed on top of GO/GQDs/GO/PEDOT:PSS by the spray-coating method. The overall smooth surface morphology of the spray-coated films serves as good contact with the top metal electrode. The electrical characterization of the fabricated device shows the bistable current states with the ON/OFF ratio of 105. The NVM device can be programmed and erased multiple times. Various conduction mechanisms were proposed to describe the charge trapping process in GQD based on the obtained current–voltage measurement.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Materials Science: Materials in Electronics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
