Abstract
The single-layer and multi-layer finite element models are developed and examined for adequacy in predicting the elastic-damage response of fiber-reinforced polymer composite laminates. A new experimental-computational approach featuring a two-tier mesh convergence analysis of the finite element models is developed. A 12-ply carbon fiber-reinforced polymer composite laminate beam specimen with anti-symmetric layups is designed and loaded to induce matrix damage under significant deflection without catastrophic fracture. A constitutive model incorporating Hashin’s equations for damage initiation criteria, along with an energy-based damage propagation law is employed in the finite element simulation. The results shows that the multi-layer finite element model predicts well the load–deflection curve of the carbon fiber-reinforced polymer composite laminate, while the single-layer model overestimates the elastic flexural stiffness of the specimen by 47 %. During the flexural deformation, matrix damage initiates in the central and edge regions of the critical laminas under compressive and tensile stresses, respectively. The multi-layer finite element model also predicted the matrix-induced interface delamination along the edges of the critical laminas under tension, as observed experimentally. The model demonstrates the adequacy in representing the role of lamina interface in dictating the elastic-damage response of carbon fiber-reinforced polymer composite laminates manufactured by prepreg layups method.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.