Abstract
Yellow clays from Moroccan phosphate mines are extracted with other waste rocks lithologies and stored in large dumps within the mine site. The present paper investigates the use of this by-product as a new aluminosilicate source for geopolymers elaboration at the laboratory scale. Yellow clays studied are mainly composed of montmorillonite, dolomite and quartz as major phases. The Toxicity Characteristic Leaching Procedure (TCLP) showed no existence of contaminant. In order to reach thermal activation, the raw clays were first calcined at different temperatures between 500 and 900 °C. Raw and calcined clays were characterized using thermogravimetric analysis (TGA), X-Ray Diffraction (XRD) and Fourier transformed infrared (FTIR) spectroscopy. For the synthesis of geopolymers, calcined powder was mixed with an alkaline solution presenting different NaOH/Na2SiO3 ratios. The compressive strength was measured at 7, 14 and 28 days and material porosity was determined using Mercury Intrusion Porosimetry method in order to explain the mechanical behavior. XRD, 27Al and 29Si Magic Angle Spinning Nuclear Magnetic Resonance (MAS-NMR) spectroscopy, Fourier transformed infrared and TGA have been used to investigate the gel structure.The thermal treatment at 900 °C allowed the destruction of crystalline structure of montmorillonite clays, as well as the formation of new phases such as periclase (MgO) and gehlenite (Ca2Al2SiO7). Furthermore, the 27Al - 29Si MAS-NMR and the XRD analysis of the elaborated materials confirmed the formation of two cementitious gels C-A-S-H (Calcium aluminum silicate hydrate) and N-A-S-H (Sodium aluminum silicate hydrate). The compressive strength was around 25 MPa at 28 days. The obtained results are promising; they have shown that elaborated materials can be adapted for construction applications. In this case, it is recommended that economic and commercial study be developed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.