Abstract

Ethanol pre-treated apple parenchyma cells are dried in a laboratory vacuum dryer. Various ethanol contents (75 to 95% m/m) and moisture contents (2 to 15 g ethanol-water-mixture per g dry mass) of the cells were adjusted before drying and the influence of these factors on drying behaviour as well as the related structural changes are studied. The initial ethanol content was found to have a significant influence on both, drying behaviour and macrostructure of the dried material. In the case of a low initial value, the ethanol content during drying already drops at moisture contents of about 0.5–1.5 g/g. As a consequence the residual particle moisture consists mainly of water at the end of drying. In contrast to high initial ethanol contents, cells at a low initial ethanol content become strongly deformed on drying. The porosity of the dried material also decreases in the latter case, relatively large and stable aggregates are formed and the water binding capacity of the dried product has diminished on a large scale. The initial moisture content influences the drying behaviour especially on applying low initial ethanol contents. If the initial moisture content is reduced the drop of the ethanol content is shifted towards the end of the drying process. The influence of initial moisture content on macrostructure, however, was found to be small compared with the effect of the initial ethanol content.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call