Abstract
Acid activated carbon obtained from cheap, non-toxic and locally available banana peel was used as a low cost and efficient adsorbent for the removal of dyes methyl orange and rhodamine-B from the aqueous solution. Changes in the resulting material before and after activation and after treatment were studied by different techniques, such as SEM-EDX, XRD, FTIR measurements. Effects of duration of treatment, amount of banana peel activated carbon, pH, and initial methyl orange and rhodamine-B concentration, on the removal of dye were studied to get optimum conditions for maximum dye removal. Removal efficiency of the activated ash remains almost constant in a wide range of pH from 2.5 to 5.6. In 75 min at room temperature removal of 98.5 % methyl orange (anionic) and 99.0 % rhodamine-B (cationic) dyes with 0.1 g and 0.125 g, respectively was obtained from the contaminated water having 10 ppm dye concentration.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.