Abstract
The photochemical removal of benzene was studied in air at atmospheric pressure using a side-on type 172nm Xe2 excimer lamp with a wide irradiation area. After 1.5min photoirradiation, C6H6 (1000ppm) in air was completely converted to HCOOH, CO, and CO2 at a total flow rate of 1000mL/min. The initial decomposition rate of C6H6 was determined to be 1.18min-1. By using a flow system, C6H6 (200ppm) was completely removed at a total flow rate of 250mL/min. The conversion of C6H6 and the energy efficiency in the removal of C6H6 changed in the 31-100% and 0.48-1.2g/kWh range, respectively, depending on the flow rate, the O2 concentration, and the chamber volume. On the basis of kinetic model simulation, dominant reaction pathways were discussed. Results show that the O(3P) + C6H6 reaction plays a significant role in the initial stage of the C6H6 decomposition. Important experimental parameters required for further improvement of the C6H6 removal apparatus using a 172 excimer lamp were discussed based on model calculations.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
