Abstract

Currently, the use of renewable energy has gradually increased due to the environmental problems present nowadays. The intermittency of distributed renewable generation poses significant challenges for the operation and integration of microgrids. Unlike the main power grid, where load balancing resources, in general, are abundant, the balancing of generation and load in a microgrid must be done by small gas turbines, diesel generators, or energy storage devices with very limited capacity and at much higher costs. Consequently, the proposed methodology seeks a model for minimizing the Energy Cost (EC) and enhancing the power supply for rural areas by designing and analyzing four different hybrid system configurations based on integrating a biomass system with a photovoltaic (PV), wind turbine (WT) and battery system. To ensure the desired power demand with minimum production cost, the research proposed an energy-efficient Hybrid DC/AC microgrid using four renewable energy sources. Lithium-ion batteries were chosen for this study due to their high energy density, long life cycle, and high efficiency. The existence of both AC and DC microgrids has led to a new concept of hybrid AC/DC microgrids which consists of both AC and DC grids tied by an Interlinking Converter (ILC). It comprises a DC grid and AC grid interlinked by a bidirectional DC/AC converter. Such a hybrid AC/DC microgrid has the advantages of both AC and DC with increased efficiency and less cost. To provide higher voltages, the Multi-Input Booster (MIB) DC-DC converters are used as a power converter in between load and source to enforce and increase the PV depending on the voltage output signal. Further extract maximum power from the solar PV system, perturb and observe algorithm-based power point tracking control mechanism is proposed DC link voltage of ILC is regulated usually by DC side control in load sharing among sources in the DC microgrid. In addition, to overcome the load fluctuation problem in a microgrid, the research introduced a Mamdani type 2 PID-fuzzy controller. Performance index parameters of the transient response characteristics are also improved by using the proposed control approach. The time-domain dynamic responses reveal that the proposed type-II fuzzy PID controller can balance the power generation and demand properly and control both system frequency and tie-line power effectively.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call