Efficient nutrient recovery/removal from real source-separated urine by coupling vacuum thermal stripping with activated sludge processes

Abstract

Separation and treatment of human urine from domestic wastewater have been recognized as a sustainable alternative to conventional urban sanitation system, but the unique water quality of source-separated urine, such as high nutrient, insufficient alkalinity and low COD/nitrogen ratio, poses challenges to the biological nitrogen removal process. It was hypothesized that a physicochemical pre-treatment should be adopted to not only reduce nitrogen load but adjust water quality suitable for biological treatment. In this study, a vacuum thermal stripping process coupled to acid absorption was used as a pre-treatment to recover ammonia from hydrolyzed urine in the form of ammonium sulphate. The maximal ammonia mass transfer coefficient of 17.6 mm/h was obtained under 60 °C and 21.3 kPa 80% of the nitrogen in hydrolyzed urine was recovered in 3 h batch stripping experiments without pH adjustment, corresponding to a nitrogen recovery loading rate of 36 kg N/m3⋅d. The majority of organic matters were retained in urine solutions, thus COD/N and alkalinity/NH4+N ratios were elevated to 4.75 and 4.37, respectively. Phosphorus recovery could be simultaneously obtained in stripping process by adding MgCl2. The remaining nitrogen was effectively removed via short-cut nitrification and denitrification in an anoxic/oxic membrane bioreactor. More than 95% of overall nutrient recovery/removal from urine was achieved with a minimal consumption of external resources. The economic assessment of the technique showed that the recovery/removal of nutrients from 1 m3 of urine can make a profit of € 0.26.