Efficient degradation of benzalkonium chloride by FeMn-CA300 catalyst activated persulfate process: Surface hydroxyl potentiation mechanism and degradation pathway

Abstract

The consumption of disinfectants increased dramatically with the outbreak of the COVID-19 epidemic. Benzalkonium chloride (DDBAC), a cationic surfactant disinfectant for import and export cargoes, is used for effective degradation method. For DDBAC effective degradation, polyhedral Fe–Mn bimetallic catalyst of Prussian blue analogue (FeMn-CA300) was novelty developed for rapid peroxymonosulfate (PMS) activation. Results showed that the Fe/Mn redox and surface hydroxyl groups in the catalyst played an important role in the DDBAC-enhanced degradation. The removal effectiveness of 10 mg L−1 DDBAC was up to 99.4% in 80 min under the initial pH = 7, catalyst dosage of 0.4 g L−1, and PMS concentration of 15 mmol L−1. In addition, FeMn-CA300 had a wide pH applicability range. The results indicated that hydroxyls, sulfate radicals, and singlet oxygen could effectively improve the degradation efficiency, where sulfate radicals played a crucial role. Finally, the corresponding degradation path of DDBAC was further provided according to GC-MS results. The results of this study provide new insights into the degradation of DDBAC, thereby highlighting the great potential of FeMnca300/PMS to control refractory organic compounds in the aqueous phase.