Abstract
A novel bifacial perovskite solar cell (PSC) is devised and prepared by using a highly transparent poly(3,4-ethylenedioxythiophene) (PEDOT) electrode. The PEDOT is used as the p-type hole-transporting material (HTM) due to the well matched band positions for the charge separation and transport. Moreover, the PEDOT layer can play a role of electron blocking layer at the CH3NH3PbI3/PEDOT interface to reduce the electron recombination rate because of its LUMO level is higher than that of the perovskite sensitizer. As a result, the bifacial PSC based on the PEDOT HTM yields front and rear efficiencies of 12.33% and 11.78% respectively, which are higher than those of the PSC without the PEDOT HTM (8.67% and 8.27% of the front and rear efficiencies). And the front efficiency is only decreased by 4.46% to the rear efficiency. These promising results highlight the potential application of the PEDOT in the cost-effective and transparent PSC, which could be used in the bifacial solar cell and tandem solar cell.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
