Abstract
Recent advancements in solar technology have increased the acceptance of antimony selenide (Sb2Se3) due to its advantageous properties. This study aims to enhance the performance of the Sb2Se3 structure by using tungsten disulfide (WS2) as the window layer and copper zinc tin selenide (CZTSe) as the back surface field (BSF) layer, utilizing SCAPS-1D (solar cell and capacitance simulator). An initial investigation of seven potential BSF layers identified CZTSe as the best choice for improving power conversion efficiency (PCE). By carefully simulating various parameters, including the thicknesses of the absorber and window layers, donor and acceptor densities, defect density, shunt resistance, and series resistance, significant performance improvements were achieved. Without the BSF layer, the cell showed a PCE of 28.20 % along with specific values for short circuit current density (JSC), open-circuit voltage (VOC), and fill factor (FF). The addition of the BSF layer increased the PCE to 31.52 %, along with enhancements in JSC, VOC, and FF. These results highlight the potential of this approach for developing high-performance Sb2Se3 based solar cells, surpassing conventional designs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have